Brother XL-3027 Owner's Manual
USING SENSOR FUNCTIONS WITH SEWING STITCH
Se
ns
or
Fu
nc
tion
nc
tion
s
Basic operations B-69
B
2
Using the Sensor Pen to Specify
the Sewing End Point
the Sewing End Point
Before start sewing, test the pattern first from steps
a
to
e
to see if the stitch can be used with this
function.
a
Turn on the machine.
b
Select a stitch pattern.
c
Start sewing, and then stop the machine
when the desired sewing end point enters
the sensor pen touch range.
when the desired sewing end point enters
the sensor pen touch range.
d
Press .
→ The sensor functions screen appears.
e
Press .
→ The sewing end point setting screen appears.
f
With the sensor pen, touch the location to
be specified as the sewing end point.
be specified as the sewing end point.
→ The distance from the current needle position to the
touched location appears.
a Press to erase the specified sewing end point.
b Press to stop specifying a setting with the sensor
b Press to stop specifying a setting with the sensor
pen.
c Press to select whether or not sewing is ended
with a complete pattern when a decorative stitch
is selected.
is selected.
→ See “Decorative Stitch End Setting Key” on
page B-70.
Note
• If
is not available, the sewing end
point cannot be specified with the selected
stitch pattern. Select a different stitch
pattern.
stitch pattern. Select a different stitch
pattern.
a
b
c