GVision 3.52 User Manual

GVI now includes all four original NFX effect algorithms from GigaStudio.  These 
effects can be applied to any loaded instrument via a flexible new FX buss insert 
architecture.  These effects are: 

•  Chorus 

•  EQ 
•  Delay 

•  Reverb 

To access these effects, click the 
FX toolbar button to bring up the 
FX tab. 
 

 

 
•  Click “Add FX Insert” to add a new FX Insert Buss.  An FX Insert Buss creates a 

new output from GVI into which effects can be inserted. 

•  Effects are added using the “Add effect” pulldown. 

•  At the bottom of each  FX Insert Buss is a pulldown allowing the output of that buss 

to be routed to a GVI output.  When hosted as a plug-in, this would go to a DAW 
input.  When running standalone this would go to an audio interface’s hardware 
output. 

•  Each effect can be enabled/disabled using the ON/OFF button in the upper left corner 

of the effect UI. 

•  The last effect can be removed using the X in the upper right of its UI. 

•  FX Insert Busses can be routed to in the output routing pulldown of the MIDI Mixer. 
 
NOTE:  When a GigaPulse instance is present from an encoded instrument, an FX Insert 
Buss is automatically created for that GigaPulse instance.  Press the EDIT button to 
access the UI for that instance of GigaPulse.  For instruments with more than one 
GigaPulse process encoded, both will appear in the grey list box.  Highlight one and press 
EDIT to access the UI for that instance.

 

2