Grundig Digital Music Player MPaxx 910 User Manual

The  player  operates  with  the  integrated  lithium-polymer  battery  1  x  3.7  V, 
150 mA.

Charge the battery for the player on a computer.

You can also charge the battery by connecting it to a USB-compatible hi-fi sy-
stem using a USB cable.

When charging with a standard USB adapter, the player is still ready for 
operation. Press » « to switch to playback mode.

   Connect the USB socket on the player to the USB socket on the computer or 

hi-fi system using the USB cable or plug the charger lead into the USB socket 
of the player.

   Switch on the computer or hi-fi or connect the charger to the power supply.

–  The LED on the player flashes during the charging procedure. The charging 

time is approximately four hours. When the battery is fully charged, the 
LED lights up constantly.

The playing time is more than 15 hours when the player is fully charged.

There is a risk of explosion if the battery is not replaced properly. Only use 
the same type of battery or an equivalent.

   Switch on the computer.

   Switch off the player.

   Connect the USB socket on the player to the USB socket on the computer 

using the USB cable.
–  A display appears on the computer screen as soon as the connection is 

made.

If the player is connected to the computer, you can select » « to switch to 
playback mode. The player icon then goes out on the computer screen. If 
you want to transfer data again, you must connect the player to the compu-
ter again.