Billion Electric Company BiPAC 7402VGO User Manual

 

Power ON/OFF switch 

Connect the supplied power adapter to this jack. 

After the device is powered on, press it to reset the 
device or restore to factory default settings. 
0-3 seconds: reset the device 
6 seconds above: restore to factory default settings (this 

is used when you can not login to the router, e.g. forgot 
the password) 

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one 

of the four LAN ports when connecting to a PC or an 
office/home network of 10Mbps or 100Mbps. 

Connect a PS2/RS-232 cable to this port when 

connecting to a PC’s RS-232 port (9-pin serial port). 

1X       ─      2X 

Connect RJ-11 cable to this port when connecting to an 

analog phone set. 

Connect the supplied RJ-11 (“telephone”) cable to this 

port when connecting to the ADSL/telephone network. 

Connect the detachable antenna to this port. 

Connect RJ-11 cable to this port when connecting to the 

telephone wall jack. 

 

3