Graco 308178H Dynamic Surge Suppressor User Manual

Page of 18
Instructions–Parts List
308178H
EN
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Dynamic Surge Suppressor
For use with double-diaphragm pumps and low-pressure reciprocating pumps.
For professional use only.
 
100 psi (0.7 MPa, 7 bar)  Maximum Fluid Working Pressure
100 psi (0.7 MPa, 7 bar)  Maximum Air Inlet Pressure
Model 224892, Series A
aluminum, with PTFE diaphragm
Model 224893, Series A
aluminum, with buna–N diaphragm
Model 224894, Series C
stainless steel, with PTFE diaphragm
Model 224895, Series C
stainless steel, with buna–N diaphragm
Table of Contents
Warnings
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Installation
4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Operation and Maintenance
7
. . . . . . . . . . . . . . . . . . . 
Troubleshooting
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Service
9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Parts Drawing
12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Parts Lists
13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Repair Kits
14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Dimensional Drawing
15
. . . . . . . . . . . . . . . . . . . . . . . 
Technical Data
16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Warranty
18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Graco Phone Number
18
. . . . . . . . . . . . . . . . . . . . . . . 
WARNING
Hazard of Using Fluids Containing Haloge-
nated Hydrocarbons
Never use 1.1.1–trichloroethane, methylene
chloride, other halogenated hydrocarbon solvents
or fluids containing such solvents in aluminum
models 224892 or 224893.  Such use could result
in a chemical reaction, with the possibility of
explosion, which could cause death, serious bodily
injury, and/or substantial property damage.
Consult your fluid suppliers to ensure that the fluids
being used are compatible with aluminum and zinc
parts.
0903
ÄÄÄ
ÄÄÄ