Brother HL-1060 Series User Manual
CHAPTER 5 MAINTENANCE
CHAPTER 5 –1
CHAPTER 5
MAINTENANCE
MAINTENANCE
REPLACING THE TONER CARTRIDGE
The printer can print approximately 2,200 pages with one toner cartridge.
When the toner cartridge is running low, the Alarm and Data (Toner) lamps
blink once every 5 seconds to indicate toner low.
When the toner cartridge is running low, the Alarm and Data (Toner) lamps
blink once every 5 seconds to indicate toner low.
✒ Note
•
Actual page count will vary depending on your average document type.
(i.e.: standard letter, detailed graphics, etc.)
(i.e.: standard letter, detailed graphics, etc.)
•
It is recommended that you always keep a new toner cartridge ready for
use for when you get the toner low warning.
use for when you get the toner low warning.
•
Discard the used toner cartridge according to local regulations. If you
are not sure of them, consult your local dealer. Be sure to seal the toner
cartridge tightly so that toner powder does not spill out of the cartridge.
Do not discard used toner cartridges with domestic rubbish.
are not sure of them, consult your local dealer. Be sure to seal the toner
cartridge tightly so that toner powder does not spill out of the cartridge.
Do not discard used toner cartridges with domestic rubbish.
•
It is recommended that you clean the printer when you replace the toner
cartridge. See
cartridge. See
Feeder
Drum
Alarm
Ready
Paper
Data
Toner
1 2
Fig. 5-1 Toner Low and Empty Indication
!
Caution
You may print approximately 100 pages after the first toner low indication.
Both Alarm and Data (Toner) lamps will blink continuously to indicate that
the toner is empty. Once this indication appears, your printer cannot resume
printing until you have installed a new toner cartridge.
Both Alarm and Data (Toner) lamps will blink continuously to indicate that
the toner is empty. Once this indication appears, your printer cannot resume
printing until you have installed a new toner cartridge.