Billion Electric Company BIPAC-741 GE V2.0 User Manual
8
Chapter 3
Configuration
The BIPAC-741 GE V2.0 can be configured with your Web browser. The web browser is
included as a standard application in the following operation systems, UNIX, Linux, Mac OS,
Windows 98/NT/2000/Me, and etc. The product provides a very easy and user-friendly interface
for configuration.
included as a standard application in the following operation systems, UNIX, Linux, Mac OS,
Windows 98/NT/2000/Me, and etc. The product provides a very easy and user-friendly interface
for configuration.
3.1 Before Configuration
This section describes the configuration required by LAN-attached PCs that communicate with
the BIPAC-741 GE V2.0, either to configure the device or for network access. These PCs must
have an Ethernet interface installed properly, be connected to the BIPAC-741 GE V2.0 either
directly or through an external repeater hub, and have TCP/IP installed and configured to obtain
an IP address through a DHCP server or a fixed IP address that must be in the same subnet of the
BIPAC-741 GE V2.0. The default IP address of the BIPAC-741 GE V2.0 is 192.168.1.254 and
subnet mask is 255.255.255.0. The best and easy way is to configure the PC to get an IP address
from the BIPAC-741 GE V2.0 ADSL Firewall Router. Also, make sure you have
UNINSTALLED any kind of software firewall that can cause problems while accessing the
192.168.1.254 IP address of the router.
the BIPAC-741 GE V2.0, either to configure the device or for network access. These PCs must
have an Ethernet interface installed properly, be connected to the BIPAC-741 GE V2.0 either
directly or through an external repeater hub, and have TCP/IP installed and configured to obtain
an IP address through a DHCP server or a fixed IP address that must be in the same subnet of the
BIPAC-741 GE V2.0. The default IP address of the BIPAC-741 GE V2.0 is 192.168.1.254 and
subnet mask is 255.255.255.0. The best and easy way is to configure the PC to get an IP address
from the BIPAC-741 GE V2.0 ADSL Firewall Router. Also, make sure you have
UNINSTALLED any kind of software firewall that can cause problems while accessing the
192.168.1.254 IP address of the router.
Please follow the steps below for PC’s network environment installation. First of all, please
check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter
must be installed. If not, please refer to MS Windows related manuals.
check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter
must be installed. If not, please refer to MS Windows related manuals.
Any TCP/IP capable workstation can be used to communicate with or through the
BIPAC-741 GE V2.0. To configure other types of workstations, please consult the
manufacturer’s documentation.
BIPAC-741 GE V2.0. To configure other types of workstations, please consult the
manufacturer’s documentation.
3.2 Connecting the BIPAC-741 GE V2.0
1.
Connect the Router to a LAN (Local Area Network) and the ADSL/telephone network.
2.
Power on the device
3.
Make sure the PWR and SYS LEDs are lit steady & LAN LED is lit.
4.
Before taking the next step, make sure you have uninstalled any software firewall.