Giant HELMETS User Manual
GIANT HELMETS OWNERS MANUAL
helmet to move out of position or
come off in an accident.
come off in an accident.
STEP 2: ADJUSTING THE
STRAPS
STRAPS
The front and rear straps should
join at a point slightly below and
in front of the ears. See Figure 2.
join at a point slightly below and
in front of the ears. See Figure 2.
To adjust the position of the
straps:
straps:
1.Open the adjustors (Figure 3)
2.Put the helmet on and slide
the straps through the
adjustors until they are
located in the correct position
as indicated in Figures above;
adjustors until they are
located in the correct position
as indicated in Figures above;
3.Make sure there is no extra
slack in any of the straps
when the adjustors are in the
correct position;
when the adjustors are in the
correct position;
4.Close and lock the adjustors.
STEP 3: ADJUSTING THE
CHIN STRAP
CHIN STRAP
Always wear the helmet with the
chin strap buckle fastened and
the strap pulled tight. Make sure
the strap rests back against the
throat, NOT on the front of the
chin. Straps worn on the front of
the chin will greatly increase the
chance of the helmet coming off
in an accident. Figures 4 and 5
show how to fasten and release
the buckle and Figure 6 shows
proper placement of the chin
strap.
chin strap buckle fastened and
the strap pulled tight. Make sure
the strap rests back against the
throat, NOT on the front of the
chin. Straps worn on the front of
the chin will greatly increase the
chance of the helmet coming off
in an accident. Figures 4 and 5
show how to fasten and release
the buckle and Figure 6 shows
proper placement of the chin
strap.
Figur
e
2
Figur
e
3
Figur
e
4
Figur
e
5
Figur
e
6
4
5
Helmet Owners Manual Art.REV2 4/20/04 11:15 AM Page 4