Brother MFC-J4710DW Quick Setup Guide
17
Macintosh
USB
W
indows
®
Macintosh
USB
For USB interface users
(Mac OS X v10.5.8, 10.6.x, 10.7.x)
18
Before you install
Make sure your machine is connected to the power
and your Macintosh is ON. You must be logged on
with Administrator rights.
and your Macintosh is ON. You must be logged on
with Administrator rights.
19
Connect the USB cable
a
Lift the scanner cover until it locks securely into
the open position.
the open position.
b
Connect the USB cable to the USB port
marked with a
marked with a
symbol a. You will find the
USB port inside the machine on the right, as
shown in the callout below.
shown in the callout below.
c
Carefully guide the USB cable into the cable
channel and out the back of the machine.
Connect the cable to your Macintosh.
channel and out the back of the machine.
Connect the cable to your Macintosh.
NOTE
For Mac OS X v10.5.0 to 10.5.7 users, upgrade to
Mac OS X v10.5.8 - 10.7.x.
Mac OS X v10.5.8 - 10.7.x.
IMPORTANT
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
cover from closing, or an error may occur.
1