Brother MFC-J4710DW Quick Setup Guide
33
For Wireless Network Users
Wirele
ss Network
i
Enter the Network Key you wrote down in
step
step
19-a on page 29, and then click Next.
j
Click Next. The settings will be sent to your
machine.
machine.
k
Disconnect the USB cable between the
computer and the machine.
computer and the machine.
l
Click Next to continue to install MFL-Pro Suite.
Wireless setup is now complete. The
Wi-Fi button at the upper right of the
Touchscreen changes to a four-level
indicator that displays the wireless signal
strength of your access point/router.
Wi-Fi button at the upper right of the
Touchscreen changes to a four-level
indicator that displays the wireless signal
strength of your access point/router.
The Wi-Fi LED
on the control panel
lights up, indicating that the machine’s
Network I/F is set to WLAN.
Network I/F is set to WLAN.
To install MFL-Pro Suite
For Windows
®
users:
Now go to
Step
For Macintosh users:
Now go to
Step
NOTE
If your network is not configured for
Authentication and Encryption, the following
screen will appear. To continue configuration,
click OK and go to
Authentication and Encryption, the following
screen will appear. To continue configuration,
click OK and go to
NOTE
• The settings will remain unchanged if you click
Cancel.
• If you want to manually enter the IP address
settings of your machine, click Change IP
Address and enter the necessary IP address
settings for your network.
Address and enter the necessary IP address
settings for your network.
• If the wireless setup failure screen appears,
click Retry.