Belkin PUREAV AP21300-12 User Manual

This function allows you to turn your Power Console on and off via any
component that is equipped with a 3~30V DC output (low-voltage trigger out).

Note: You cannot turn off the switched outlets on the Power Console

with the switched button on the front of the unit when there 
is any external power signal supplied to either the AC or DC
remote inputs.

A. Connect the Remote DC Control Cable (included) into the outlet labeled 

“DC IN” on the rear panel of the Power Console. (Fig. 3a)

B. Press the “Remote” button on the front of the Power Console to 

turn on the remote function. The LCD display should read 
REMOTE ON. (Fig. 3b)

C. Press the “Switched” button on the front of the Power Console to turn

off the switched outlets.

D. Connect the other end of the Remote DC Control Cable into the 3~30V

output (low-voltage trigger out) on your component. When you turn on
the component, the outlets on the Power Console that are programmed
as “Switched” will be turned on immediately and the Switched/Delayed”
outlets will come on after an 8 second delay.

9