Beko 26WLZ530HID User Manual

16

If you press 

OK button when no menu is 

open, 

Channel List menu will be displayed 

on the screen.

CHANNEL LİST

Channel 1
Channel 2
Channel 3
Channel 4

Select

Exit

You can see all the channels of the current 

mode while you are in the 

Channel List 

menu, you can select the desired channel 

with 

Up/Down buttons and view it by 

pressing the 

OK button.

This menu gives information about Channel, 

Network, Modulation, Signal level and quality. 

Press 

MENU button to enter this menu. 

Select 

Channel Setup menu by pressing 

the 

Right/Left movement buttons. Select 

Signal Information tab by pressing the 

Down movement button and confirm with 

Right movement button or OK button. Signal 

Information menu will be displayed.

Note: Signal Information menu will be active 

only for Digital broadcasts.

In this menu, you can check the CA Module 

settings. If a CI module is inserted for a 

channel that has a scrambled broadcast, then 

a submenu for that module is opened and the 

information for that module is updated. 

When this feature is set to On, you can 

connect an external antenna to your television 

without needing any external source. Scroll to 

the 

Active Antenna Power tab by pressing 

the 

down movement button in the Channel 

Setup menu and select On by pressing the 

Right/Left movement buttons.

Signal Information

Channel 

23 

490 Mhz

Exit

Network 

XX Network

Modulation  2X 64XXX X2/3
Quality 

60%

Signal Strength 

90%