GE Swing Prism - NDT Rigid Borescope Brochure
Typical Applications
Pressure vessels
Tubes
Boiler and condenser tubes
Large diesel engines
Helicopter blades
Structural inspection
Chemical plants
Weapon systems
Structural survey of a steel
box-girder railroad bridge
Gas-wash damage in barrel
of heavy artillery gun
Inspecting a tubed
heat exchanger
Extend your inspection capabilities
Extendable endoscopes with lamp illumination are used for
inspections where the instrument must be very long and
high levels of illumination are required. Their modular design
allows easy transportation of the endoscope as well
inspections where the instrument must be very long and
high levels of illumination are required. Their modular design
allows easy transportation of the endoscope as well
as
easy and fast assembly.
By using extension tubes, lengths up to 30,000 mm (1181 in.) are possible. The
interchangeable objective heads carry compact and powerful low voltage halogen lamps.
Because the illumination source is integral with the objective head, the most efficient
illumination of the inspection area is ensured. Once a diameter is selected, you have the
ability to modify the instrument for length, field of view, direction of view and eyepiece to
suit an almost infinite range of inspection tasks.
interchangeable objective heads carry compact and powerful low voltage halogen lamps.
Because the illumination source is integral with the objective head, the most efficient
illumination of the inspection area is ensured. Once a diameter is selected, you have the
ability to modify the instrument for length, field of view, direction of view and eyepiece to
suit an almost infinite range of inspection tasks.
E
XTENDABLE
B
ORESCOPES
w w w . e v e r e s t v i t . c o m
To schedule a product demonstration or to find out more, call us at 888-332-EVIT(3848) or 973-448-0077
The basic system is comprised of the following:
Ocular tube with monocular attachment
Objective tube, as required
Connecting cable
Power supply (transformer/rechargeable battery)
Objective head (purchased separately)
Depending on the nature of inspection, extension tubes can be added to the basic system
to produce an endoscope of the required length. These are connected by means of a
positive square-section screw thread. It is possible to use the instrument suspended in a
vertical position. The power is supplied by a variable output transformer operating from
AC power or from a sealed rechargeable battery pack.
to produce an endoscope of the required length. These are connected by means of a
positive square-section screw thread. It is possible to use the instrument suspended in a
vertical position. The power is supplied by a variable output transformer operating from
AC power or from a sealed rechargeable battery pack.