Husqvarna Trimmer 327HDA65 User Manual
FUEL HANDLING
14 – English
Mixing
•
Always mix the gasoline and oil in a clean container
intended for fuel.
intended for fuel.
•
Always start by filling half the amount of the gasoline
to be used. Then add the entire amount of oil. Mix
(shake) the fuel mixture. Add the remaining amount of
gasoline.
to be used. Then add the entire amount of oil. Mix
(shake) the fuel mixture. Add the remaining amount of
gasoline.
•
Mix (shake) the fuel mixture thoroughly before filling
the machine’s fuel tank.
the machine’s fuel tank.
•
Do not mix more than one month’s supply of fuel at a
time.
time.
•
If the machine is not used for some time the fuel tank
should be emptied and cleaned.
should be emptied and cleaned.
Fueling
•
Clean the area around the fuel cap. Contamination in
the tank can cause operating problems.
the tank can cause operating problems.
•
Ensure that the fuel is well mixed by shaking the
container before filling the tank.
container before filling the tank.
!
WARNING! The catalytic converter
muffler gets very hot during and after
use. This also applies during idling. Be
aware of the fire hazard, especially when
working near flammable substances and/
or vapours.
muffler gets very hot during and after
use. This also applies during idling. Be
aware of the fire hazard, especially when
working near flammable substances and/
or vapours.
!
WARNING! Taking the following
precautions, will lessen the risk of fire:
precautions, will lessen the risk of fire:
Do not smoke or place hot objects near
fuel.
fuel.
Always shut off the engine before
refuelling.
refuelling.
Always stop the engine and let it cool for
a few minutes before refuelling.
a few minutes before refuelling.
When refuelling, open the fuel cap slowly
so that any excess pressure is released
gently.
so that any excess pressure is released
gently.
Tighten the fuel cap carefully after
refuelling.
refuelling.
Always move the machine away from the
refuelling area before starting.
refuelling area before starting.