Behringer Power Overdrive PO300 Owner's Manual
POWER OVERDRIVE PO300
Ultimate Power Overdrive Effects Pedal
Thank you for showing your confidence in us by purchasing the BEHRINGER POWER OVERDRIVE PO300.
This high-quality effects pedal enables you to produce super thick, tube-like overdrive plus endless
sustain. Thanks to its high-performance features you can achieve classic hard rock or heavy metal
overdrive sounds.
1. Controls
(1)
The LEVEL control adjusts the output level.
(2)
The PHAT control modifies the frequency range to achieve a more robust and “fatter” sound.
(3)
The POWER control adjusts the strength of the sound. High settings provide a more
mid-accentuated sound, while low settings cut away some midrange energy.
(4)
The DRIVE control adjusts the amount of overdrive effect.
(5)
The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
(6)
Use the footswitch to activate/deactivate the effect.
(7)
Use this 1/4" TS IN connector to plug in the instrument cable.
(8)
The 1/4" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
◊
The PO300 has no on/off switch. As soon as you insert the plug into the in connector,
the PO300 is on. When not in use, remove the plug from the in connector. This extends
the life of the battery.
The SERIAL NUMBER is located at the underside.
(1)
(8)
(4)
(5)
(7)
(6)
(2)
(3)