Bosch Appliances Home Security System DVA-12T User Manual
22
en | Subsystem Monitoring
RAID Subsystem DVA-12T | Installation Manual
F.01U.027.798 | V1 | 2006.06
Bosch Security Systems
4.2
Status-indicating LEDs
4.2.1
Brief Overview of the LEDs
The following devices all come with LEDs that inform subsystem managers about the opera-
tional status of the component on which they are mounted. The RAID subsystem has status-
indicating LEDs distributed over the active components in the following ways:
4.2.2
Drive Tray LEDs
Two (2) LED indicators are located on the right side of each drive tray. (See Figure 4.1) Refer
to Table 4.2 for the LED definitions. When notified by a drive failure message, you should
check the drive tray indicators to find the correct location of the failed drive. Replacing the
wrong drive can fail two members of a logical array and thus render the array data unrecover-
able.
Fig. 4.1
Drive Tray LEDs
Component
LEDs per Unit
Total LEDs
Definition
Drive Trays
2
24
Controller
Module
9 9
Ethernet Ports
2
4 (2 ports)
BBU Module
(if BBU is
installed)
1
1
PSU Module
1
2
Cooling Module 1
3
Table 4.1
Name
Color
Status
Drive Busy
Blue
FLASHING indicates data is being written to or read from the drive.
The drive is busy.
OFF indicates that there is no activity on the drive.
Power Status
Green/
Red
GREEN indicates that a drive is installed in the drive tray
RED indicates that there is a drive failure.
Table 4.2
3-2: Drive Tray LED Definitions