Behringer Chorus Space-C CC300 Owner's Manual

Analog 3-Dimensional Sound Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER CHORUS SPACE-C CC300. 

This ultimate effects pedal comes with 4 dedicated space presets that let you add a breathtaking third 

dimension to your sound or instrument. Experience the secret weapon of professional recording studios.
The chorus effect adds a shifting detuned signal to the original, similar to playing in unison in a 

group of instruments, and it is often used for dispersing sounds.

(1) 

The MODE SELECTOR switches let you choose between 4 dedicated space presets. Use these 

presets in any combination or even activate them at the same time. This results in 16 combinations 

giving you a wide range of spacious effects. The effect gets deeper from the left to the right.

(2) 

The ON/BATT LED illuminates when the effect is activated. It also serves as a 

battery level indicator. 

(3) 

Use the footswitch to activate/deactivate the effect.

(4) 

Use this 1/4" TS IN connector to plug in the instrument cable.

(5) 

The two 1/4" TS OUT A and OUT B connectors send the signal to your amp. Use both connectors 

if you want to achieve full stereo chorus effect. For mono use plug in OUT A only.

Use the DC IN connection to plug in a 9 V power supply (not included). 
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery 

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to 

scratch the unit.

(1)

(4)

(3)

(5)

(2)