Behringer Musical Instrument EG8180 User Manual
EUROGRAND
Connection to external equipment
21
Sending music sequencer data
>
Use this function to send music sequencer data via the MIDI output
Use this function to send music sequencer data via the MIDI output
of the EUROGRAND. This allows you to archive recorded music
pieces on your music computer or hardware MIDI sequencer. This
type of transmission is only for system-exclusive data packages
(MIDI dump), but not for MIDI playing data.
Function:
Function:
E7.8
Value:
-
Description:
Connect the EUROGRAND to a computer or hardware
1)
sequencer as described in chapter 6.3.2.
Set the MIDI sequencer to reception-ready mode.
Set the MIDI sequencer to reception-ready mode.
2)
Select the function
3)
E7.8
in EDIT mode.
Press the +/YES button to execute the transmission.
4)
When the transmission is complete, the display shows End.
You can send the data back to the EUROGRAND at a
+
later date. To do this, use the MIDI IN jack to connect
the EUROGRAND to the device that received the data
before. As soon as you start the transmission from the
MIDI sequencer, the EUROGRAND will automatically
receive the data. Make sure that neither DEMO, EDIT or
music sequencer mode is active!