Huskee 1032822 Owner's Manual

NOTE: This log splitter was partially assembled at the factory. Refer to the drawing and parts list should it become

necessary to disassemble the unit for repair or replacement of parts.

Page 7

1

401613R0

Beam Assembly

1

2

401102R22

Tank/Engine Assembly

1

401102RC22

Tank/Engine Assembly (CA)

1

3

400312B0

Tire and Wheel assembly

2

4

40126300

Tongue Assembly

1

40115500

Hardware Kit

1

STEP 1:  Remove all the components from the shipping container.Inspect each piece for shipping damage. If any part is

  damaged, contact your dealer or delivering carrier.

STEP 2:   Attach the two wheels (2) to the tank assembly (1) wheel spindles using the 3/4” light flat washers(3), 3/4” NF

   slotted nuts (4), 1/8” x 1-1/2” cotter pins (5)  and the hub caps (6). These items are in the hardware package.
   Tighten the slotted nuts and make sure the wheels rotate freely.

1

  401102R22    Tank Assembly

1

  401102RC22  Tank Assembly (CA)

1

2

  400312B0      Wheel Assembly

2

3

        O/L         3/4” Light Flatwasher

2

4

  17012000      3/4” Slotted Nut

2

5

         O/L         1/8” x 1-1/2” Cotter Pin 2

6

  40033200      Hub Cap

2

O/L- Obtain locally. Common fasteners available
         through hardware and farm stores.