Behringer Distortion-X XD300 Leaflet

Thrash Metal Distortion Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER DISTORTION-X XD300. This high-quality 

effects pedal enables you to produce super thick, tube-like distortion plus endless sustain. Thanks to its 

high-performance features you can achieve the typical hard rock or heavy metal distortion sounds.

(1) 

The LEVEL control adjusts the output level.

(2) 

The CONTOUR control modifies the tone of the signal to achieve everything from traditional to 

super-modern sounds. Turning it to the right will create a milder sound while turning it to the left 

provides heavier and sharper sounds.

(3) 

The PUNCH control adds aggressive mid-frequency punch to the signal for more distinctive 

distortion sounds.

(4) 

The DIST(ortion) control adjusts the amount of distortion effect.

(5) 

The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.

(6) 

Use the footswitch to activate/deactivate the effect.

(7) 

Use this ¼" TS IN connector to plug in the instrument cable.

(8) 

The ¼" TS OUT connector sends the signal to your amp. 

Use the DC IN connection to plug in a 9 V power supply (not included). 
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery 

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to 

scratch the unit.

The SERIAL NUMBER is located at the underside.

(1)

(8)

(5)

(4)

(7)

(6)

(3)

(2)