Behringer Vintage Time Machine VM1 User Manual

Vintage Analog Delay/Echo/Chorus/Vibrato

Thank you for showing your confidence in us by purchasing the BEHRINGER VINTAGE TIME MACHINE VM1. 

This high-quality classic effect delivers true analog delay with up to 450 ms of organic echo to rival any 

tape delay, vibrant chorus and mind-bending vibrato.

(1) 

Use the 9 V_ connection to plug in a 9 V power supply.

(2) 

Use the POWER switch to activate/deactivate the unit.

(3) 

The POWER LED lights up when the unit is activated.

(4) 

The ¼" TS EFFECT OUT connector sends the signal to your amp.

(5) 

The ¼" TS DIRECT OUT connector always provides the direct, unaffected signal to feed for example 

a separate guitar amp.

(6) 

Use this ¼" TS INPUT connector to plug in the instrument cable.

(7) 

The CHORUS/VIBRATO switch selects between chorus or vibrato effect.

(8) 

The LEVEL control adjusts the input level. The LEVEL control adjusts the input level.

(9) 

The OVERLOAD LED illuminates when the input signal is too high. In this case reduce the input 

level with the LEVEL control.

(10) 

The MIX control adjusts the balance between the effect signal and the direct signal.

(11) 

The FEEDBACK control determines the amount of signal repetitions. Since the output signal is fed back 

to the input of the delay line, it is possible to generate a self oscillation at high settings of this control.

(12) 

The DELAY control adjusts the time between the direct signal and the signal repetitions (Delay Time).

(13) 

The CHORUS/VIBRATO control adjusts the effects speed of the modulation effect added to 

the delay. Slow settings produce a chorus effect while fast settings provide vibrato.

(14) 

Use the footswitch to activate/deactivate the effect.

The SERIAL NUMBER is located on the underside.

(1)

(7)

(14)

(12)

(11)

(10)

(2)

(6)

(4)

(5)

(8)

(3)

(13)

(9)