Evolveo EVOLVEO SportCam W8 User Manual
Burst Photo:
In this mode the camera takes photos in a sequence according to the burst rate
setting: 3 pic. / 1 s, 5 pic. /1 s, 10 pic. / 1 s, 10 pic. / 2 s.
This setting can be changed in the Photo Menu>Burst Rate.
If this setting is set to OFF, the camera takes a single photo only.
To Start
In this mode the camera takes photos in a sequence according to the burst rate
setting: 3 pic. / 1 s, 5 pic. /1 s, 10 pic. / 1 s, 10 pic. / 2 s.
This setting can be changed in the Photo Menu>Burst Rate.
If this setting is set to OFF, the camera takes a single photo only.
To Start
Press the Photo button
. The red LED status indicator will
flash and the shutter will actuate several times.
To Stop
Press the Photo button
again to stop shooting.
Time Lapse:
In this mode the camera will take sequentially: 1 frame per second, 1 frame per 2
seconds,
1 frame per 5 seconds, 1 frame per 10 seconds, 1 frame per 30 seconds or 1
frame per 60 seconds.
To Start
Press and hold button
, Menu > Video setting > Time
Lapse and set required interval for time lapse video recording.
Press the Video button
. The red LED status indicator will
light up and you can hear the shutter sound repeatedly. The
LED will flash each time a photo is taken.
LED will flash each time a photo is taken.
To Stop
Press the Video button
again to stop recording.
When using the Time Lapse mode, a microSD card Speed Class 10 is required.
Verify that the camera is in the Time Lapse mode before capturing the Time
Lapse series.
Self-Timer:
To activate
Verify that the camera is in the Time Lapse mode before capturing the Time
Lapse series.
Self-Timer:
To activate
Press and hold button
, Menu > Photo Setting > Self
Timer.
Select “OFF”/3/5/10/30/60 second intervals.
Select “OFF”/3/5/10/30/60 second intervals.
Default Settings:
The camera powers up with the following default settings:
Video resolution 1080p @60fps
Photo resolution 16.0 Megapixels (MP)
Photo Burst mode: SINGLE
Wi-Fi: ON
Display: ON
Date and time stamp: OFF
24