Brother BAS-300G-484/484SF Owner's Manual

 

 

11 

KE-430D, BE-438D

       

Machine installation should only be carried out by a 

qualified technician. 
Contact your Brother dealer or a qualified electrician 

for any electrical work that may need to be done. 
The sewing machine head weighs approximately 56 

kg. The installation should be carried out by two or 

more people. 
Do not connect the power cord until installation is 

complete, otherwise the machine may operate if the 

foot switch is depressed by mistake, which could 

result in injury. 
Hold the machine head with both hands when tilting it 

back or returning it to its original position. 

Furthermore, after tilting back the machine head, do 

not push the face plate side or the pulley side from 

above, as this could cause the machine head to 

topple over, which may result in personal injury or 

damage to the machine

.

 

All cords should be secured at least 25 mm away 

from any moving parts. Furthermore, do not 

excessively bend the cable or secure it too firmly 

staples, otherwise there is the danger that fire or 

electric shocks could occur. 
Be sure to connect the ground. If the ground 

connection is not secure, you run the risk of receiving 

a serious electric shock, and problems with correct 

operation may also occur. 
Install the safety covers to the machine head and 

motor. 

 

• The thickness of the table should be at least 40 mm, and it should be strong enough to bear the weight and vibration of the 

sewing machine. 

• If the distance A between the insides of the legs is less than 740 mm, move the control box installation position to the left (B 

= 254 mm). 

• Check that the control box is at least 10 mm away from the leg. If the control box and the leg are too close together, it may 

result in incorrect sewing machine operation.

3625M