Barco Coronis Fusion MDCC 6130 User Manual
Cleaning instructions
47
Cleaning instructions
Precautions
Precautions
• Before cleaning, switch the display in stand-by position to
prevent the control touch keys from being activated
inadvertently by sweeping over the front filter. In stand-by
position the touch keys cannot be activated by just sweeping
over them. To switch the display on again, you must press the
stand-by touch key for a few seconds.
inadvertently by sweeping over the front filter. In stand-by
position the touch keys cannot be activated by just sweeping
over them. To switch the display on again, you must press the
stand-by touch key for a few seconds.
• Take care not to damage or scratch the front filter or LCD
panel. Be careful with rings or other jewelry that can touch
the front filter.
the front filter.
• Do not apply pressure on the front filter or LCD panel.
• Do not apply or spray liquid directly to the front filter, panel or
• Do not apply or spray liquid directly to the front filter, panel or
cabinet as excess liquid may cause damage to internal
electronics. Instead, apply the liquid to the cleaning cloth.
electronics. Instead, apply the liquid to the cleaning cloth.
Front glass
Proceed as follows:
Clean the glass using a sponge, cleaning cloth or soft tissue, lightly
moistened with one of the following tested products:
moistened with one of the following tested products:
• Flux
• Windex Glass Plus
• Bohle glass cleaner
• Mr. Proper
• Pril
• Ajax glass cleaner
• Windex Glass Plus
• Bohle glass cleaner
• Mr. Proper
• Pril
• Ajax glass cleaner