Barco CRT Television MCFD 1219 - MCFD 1219 TS User Manual
MFCD 1219 (TS) User's Guide
11
2.4 Starting up
Proceed as follows:
1
Switch on the computer.
2
Switch on the display by pushing the Power
key (8).
key (8).
3
If necessary, select a suitable resolution in
the computer operating system. Please
refer to Appendix A, "Possible resolutions"
in the back of this manual.
the computer operating system. Please
refer to Appendix A, "Possible resolutions"
in the back of this manual.
Note: The recommended resolution for best
image quality is 1280x1024 at 60 Hz.
The microcontroller in the display checks if the
connected video signal has been adjusted before,
and if these adjustments have been stored in the
memory. There are 2 possibilities:
connected video signal has been adjusted before,
and if these adjustments have been stored in the
memory. There are 2 possibilities:
a) The video signal has been adjusted and
stored in the memory.
stored in the memory.
In this case, the display switches to this memory
location (the so-called mode) and the image will
need no further adjustments.
location (the so-called mode) and the image will
need no further adjustments.
b) The video signal has not been adjusted and
stored yet.
stored yet.
In this case, the display will auto-size the picture
and store the settings in one of the user modes.
and store the settings in one of the user modes.
2.5 Install the software
NioWatch software:
Insert the CD-ROM in the CD-ROM drive. The
CD-ROM starts automatically. Please follow the
instructions on the screen.
CD-ROM starts automatically. Please follow the
instructions on the screen.
The CD-ROM contains user instructions about the
usage of the NioWatch.
usage of the NioWatch.
Touch panel software:
Please refer to the TouchKit installation & user
manual on CD-ROM.
manual on CD-ROM.
(8)