B&C Speakers DE75PTN Leaflet

220 W continuous program power capacity

2” horn throat diameter

75 mm (3 in) aluminium voice coil

Titanium diaphragm

500 – 18000 Hz response

107 dB sensitivity

Throat Diameter (1)

50 mm (2 in)

Nominal Impedance (2)

8 ohm

Minimum Impedance

8.3 ohm

Nominal Power Handling (3)

110 W

Continuous Power Handling (4)

220 W

Sensitivity (1W/1m) (5)

107 dB

Frequency Range

0.5 -18 kHz

Recommended Crossover (6)

0.8 kHz

Voice Coil Diameter

75 mm (3 in)

Winding Material

Aluminium

Inductance

0.14 mH

Diaphragm Material

Titanium

Flux Density

1.85 T

Four M6 holes 90° on 102 mm

(4 in) diameter
Overall  Diameter

170 mm (6.7 in)

Depth

64 mm (2.5 in)

Net Weight (1 unit)

4.5 kg  (9.9 lb)

Shipping Weight (2 units)

9.6 kg  (21.2 lb)

Shipping Box (2 units)

210x210x190 mm

(8.3x8.3x7.5 in)

1

Driver mounted on B&C ME75 horn

2

Also available in 16 ohms, data upon request

3

2 hours test made with continuous pink noise signal (6 dB crest factor)

within the specified range . Power calculated on  rated minimum

impedance.

4

Power on Continuous Program is defined as 3 dB greater than the

Nominal rating.

5

Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.

6

12 dB/oct. or higher slope high-pass filter.