Brother TN-872A Owner's Manual
Programmer
127
Chaprter 3 Programming with Command Function
4
Ending program
1.
Press
P
.
Lines
The pattern with lines is programmed.
The example in the left is used for explanation of
programming.
The example in the left is used for explanation of
programming.
1
Programming
1.
Press
P
.
The work clamp moves to the home position and the
programmer screen is displayed.
programmer screen is displayed.
2.
Move the work clamp with
. Press
L
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
3.
Input the stitch length.
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
4.
Press
LI
LI
.
To change the stitch length, specify the pitch value before
pressing
LI
LI
.
5.
Move the work clamp with
. Press
L
when the needle point is at point B of the
pattern.
6.
Repeat steps 4 and 5 and create the program
to point E.
2
Inputting the end code
1.
Press
L
at the last stitch and press
E
1
1
1
.
The work clamp returns to the start position.