Brother TN-872A Owner's Manual
Programmer
156
Chapter 3 Programming with Command Function
2.
Move the work clamp with
so that
the needle point is at B of the pattern.
Record the coordinates (values of and ).
If the moving distance is long, press
F
before movement.
3.
Press
R
.
The work clamp moves to the home position.
4.
Press
1
and press
.
The needle point moves to point C.
5.
Move the work clamp with
for the
coordinates recorded in step 2.
The moved point is now D.
If the moving distance is long, press
F
before movement.
6.
Turn the pulley with a hand and put a
marking with the needle to indicate the
position of point D.
7.
Turn the pulley with a hand and move the
needle to the top point.
8.
Press
R
.
The work clamp returns to the home position.
9.
Move the work clamp with
. Press
L
when the needle point is at D of the
pattern.
3
Saving
1.
Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
4
Ending program
1.
Press
P
.