Brother TN-872A Owner's Manual
Programmer
37
Chapter 2 Programming with Help Function
3.
Move the work clamp with
. Press
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4. Program pattern 1.
5. Press
ESC
ESC
after input of point B.
The number of pressing
ESC
ESC
depends on the programming
method for pattern 1.
When
is used for programming, press twice.
When each stitch is programmed, press once.
6.
Select
with
and press
.
7.
Move the work clamp with
. Press
when the needle point is at point C of the
pattern.
8.
Press
ESC
ESC
.
9.
Program pattern 2.
10. When point D is programmed, press
ESC
ESC
.
The number of pressing
ESC
ESC
depends on the programming
method for pattern 1.
When
is used for programming, press twice.
When each stitch is programmed, press once.
2
Inputting the end code
1.
Select
with
and press
.
2.
Select the end code type with
and
press
.
"111" is selected in the example. Press
and the work clamp
returns to the first stitch(point A).
3. Press
ESC
ESC
.
The work clamp returns to the home position.
Pattern 2
Pattern 1