Brother TL-848A Owner's Manual
Programmer
125
Chaprter 3 Programming with Command Function
Programming example
Frequently used programming method is explained here. Refer to "Programming" (page 161) for function
and operation of each icon.
Programming for each stitch
Program each stitch according to the pattern. The
example in the left is used for explanation.
example in the left is used for explanation.
1
Programming
1.
Press
P
.
The work clamp moves to the home position and the
programmer screen is displayed.
programmer screen is displayed.
2.
Move the work clamp with
. Press
L
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
3.
Repeat step 2 and create the program to
point C.
2
Inputting the end code
1.
Press
L
at the last stitch and press
E
1
1
1
.
The work clamp returns to the start position.
3
Saving
1.
Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.