Brother TL-848A Owner's Manual
Programmer
144
Chapter 3 Programming with Command Function
Changing partially
A part of the programmed pattern is changed. The
example in the left is used for explanation of creating
5', 6' and 7'.
example in the left is used for explanation of creating
5', 6' and 7'.
1
Calling data
1.
Specify the program number on the
operation panel and press the read/write
switch to read the data.
2
Moving to position 4.
1.
Press
9
9
9
and press
.
The work clamp moves from the start position by each stitch.
2.
When the needle point reaches 4, press
.
The work clamp stops. If the work clamp passes, input a few
stitches and press
. The needle returns for a few stitches of
the input.
3
Programming a new point.
1.
Move the work clamp with
. Press
L
when the needle point is at 5'.
5' is programmed.
2.
Repeat step 1 and program 6' and 7'.
3.
Press
1
and press
.
The needle point moves to 5.