Brother TL-848A Owner's Manual
Programmer
29
Chapter 2 Programming with Help Function
Lines
The pattern with lines is programmed.
The example in the left is used for explanation of
programming.
The example in the left is used for explanation of
programming.
1
Programming
1.
Press
P
.
The work clamp moves to the home position and the
programmer screen is displayed.
programmer screen is displayed.
2.
Select
with
and press
.
3.
Move the work clamp with
. Press
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4.
Select
with
and press
.
5.
Input the stitch length and press
.
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
Input 030 to make the stitch length to 3.0 mm.
6.
Move the work clamp with
. Press
when the needle point is at point B of the
pattern.
7.
Repeat step 6 and create the program to
point E.
8.
When point E is programmed, press
ESC
ESC
twice.