Brother TL-848A Owner's Manual
Programmer
47
Chapter 2 Programming with Help Function
4.
Select
with
and press
.
5.
Select
with
and press
.
6.
Input the zigzag width and the stitch length
and press
.
3.0 mm is input in the example.
Input 030 to make the width and the stitch length to 3.0 mm.
To switch input between the stitch length and the width, use
.
7.
Move the work clamp with
. Press
when the needle point is at point B of the
pattern.
To program curves, repeat this step.
8.
Press
again.
9.
Press
ESC
ESC
three times.
2
Inputting the end code
1.
Select
with
and press
.
2.
Select the end code type with
and
press
.
"111" is selected in the example. Press
and the work clamp
returns to the first stitch(point A).
3.
Press
ESC
ESC
.
The work clamp returns to the home position.