Brother TL-848A Owner's Manual
Programmer
51
Chapter 2 Programming with Help Function
10. Program the following points up to point
#4
in the same manner.
When programming, be sure that the points and splits specified
on the inside line are paired with those on the outside line
respectively.
on the inside line are paired with those on the outside line
respectively.
If there are any points or splits not paired, the needle point
automatically returns to the previous point. Correct the program.
automatically returns to the previous point. Correct the program.
11. Press
.
12. Press
ESC
ESC
.
3
Inputting the end code
1.
Select
with
and press
.
2.
Select the end code type with
and
press
.
"111" is selected in the example. Press
and the work clamp
returns to the first stitch(point A).
3.
Press
ESC
ESC
.
The work clamp returns to the home position.
4
Saving
1.
Select
with
and press
.
2.
Select
with
and press
.
3.
Input the data number and press
.
4.
Press
ESC
ESC
.
5
Ending program
1. Press
P
.