Brother SU-877A Owner's Manual
132
Programmer
Chapter 3 Programming with Command Function
Ending program
1.
Press
.
Double stitch
A double stitch is programmed to make two lines with a
constant width.
The example in the left is used for explanation of a double
stitch to the left of sewing direction.
constant width.
The example in the left is used for explanation of a double
stitch to the left of sewing direction.
When the line changes from straight to curve or curve to straight as in points B or E, be sure to
press
to make a split.
More intermediate points such as points C or D will create smooth curves.
Programming
1.
Press
.
The work clamp moves to the home position and
the programmer screen is displayed.
2.
Move the work clamp with
. Press
when the needle point is at point A of the
pattern.
pattern.
The first stitch (point A) is programmed.
3.
Press
and press
.
is the command for the double stitch.
Input the width of the double stitch in
. 3.0
mm is input in the example.
4.
Input the stitch length and press
.
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
Input 030 to make the stitch length to 3.0 mm.
5.
Create the program to point F in the similar
manner of curve program.
manner of curve program.
If a straight line is present as in the example, press
at the end of the line.