Brother LZ2-B855E Owner's Manual
Programmer
141
Chapter 3 Programming with Command Function
2. Connect each direction change point on the
inside line with the matched direction change
point on the outside line using a line.
point on the outside line using a line.
3. Provide one point (or more points) between the
above two direction change points, and connect
them using a line.
them using a line.
Follow the procedure for curve points specification.
Specify points in pairs on the inside and outside
lines. The lines should be spaced uniformly.
Programming
1.
Press
.
The work clamp moves to the home position and
the programmer screen is displayed.
2.
Move the work clamp with
. Press
when the needle point is at point 1 of the
pattern.
pattern.
The first stitch (point 1) is programmed.
3. Press
and
.
28
27
26
25
24
23
22
21
20
19
18
1
2
3
4
5
6
7
8 9
10
11
12
13
14
15
16
17
34
33
32
31
30
29