Brother LZ2-B855E Owner's Manual
146
Programmer
Chapter 3 Programming with Command Function
Changing partially
A part of the programmed pattern is changed. The example in
the left is used for explanation of creating 5', 6' and 7'.
the left is used for explanation of creating 5', 6' and 7'.
Calling data
1.
Specify the program number on the operation
panel and press the read/write switch to read
the data.
panel and press the read/write switch to read
the data.
Moving to position 4.
1.
Press
and press
.
The work clamp moves from the start position by
each stitch.
2.
When the needle point reaches 4, press
.
The work clamp stops. If the work clamp passes,
input a few stitches and press
input a few stitches and press
. The needle
returns for a few stitches of the input.
Programming a new point.
1.
Move the work clamp with
.
Press
when the needle point is at 5'.
5' is programmed.
2.
Repeat step 1 and program 6' and 7'.
3.
Press
and press
.
The needle point moves to 5.