Brother LZ2-B855E Owner's Manual
Programmer
179
Chapter 3 Programming with Command Function
3.
Input command depending on the feed.
Press
if not specified.
Creating split data
Command to be used
Stopping the needle at the upper end for the split.
Stopping the needle at the lower end for the split.
1.
Input command depending on the split.
Creating magnified data
Command to be used
Input for magnification (x2)
Input for magnification (x5)
Input for magnification (x10)
The following three scales are available for magnification: x2, x5, and x10.
Use a pattern sheet suitable for the magnified pattern.
The magnified data is reduced when the end code is input.
Use a pattern sheet suitable for the magnified pattern.
The magnified data is reduced when the end code is input.
1.
Make sure that the needle is at the home position.
Press
if not specified.
2.
Select magnification and press
.