Brother ínnov-ís 1000 Owner's Manual
53
4
1
2
6
5
3
Measure the button diameter + thickness to set
the plate.
the plate.
Example: For a button with a diameter of 1.5
cm (9/16”) and a thickness of 1 cm
(3/8”), the scale should be set at 2.5
cm (1”)
(3/8”), the scale should be set at 2.5
cm (1”)
1 Thickness [1 cm (3/8”)]
2 Diameter [1.5 cm (9/16”)]
3 Button holder plate
4 Scale
5 Diameter + thickness [2.5 cm (1”)]
2 Diameter [1.5 cm (9/16”)]
3 Button holder plate
4 Scale
5 Diameter + thickness [2.5 cm (1”)]
[0.5 cm (3/16”) in one scale.]
6 0.5 cm (3/16”)
Buttons that do not fit into the guide plate (Odd-shaped buttons)
Changing the stitch length
3
2
1
Touch the “
” and “
” stitch length setting keys to adjust
the stitch length.
1 “
”: Longer
2 Normal length 0.4 mm (1/64”)
3 “
3 “
”: Shorter
*
If the fabric will not feed (for instance, because it is too
thick), touch the “
thick), touch the “
” stitch length setting key to increase
the stitch length.
Changing the stitch width
2
1
Touch the “
” and “
” stitch width setting keys to adjust
the stitch width.
1 “AUTO” width 5.0 mm (3/16”)
2 “
2 “
” : Narrower