Brother HS-5000 Owner's Manual

USER’S GUIDE

4–4

English: CS3 User’s Guide, Chapter 4

Set the printer to off-line by pushing the Online Button first.
Pressing the 

 button while holding down the 

 button starts the test

print.  Check the printed test page and if you find any printing problems,
perform the print head cleaning as described below.

Release the two buttons immediately after pressing the 

 button and the

DATA LED will start to blink.  If it does not, the buttons were held down for too
long and you will need to start the test selection again.

✒ Note
Press the buttons gently.  Do not press with too much force or hold the buttons
down for a long time.  If you do the operation might now start.

Set the printer to off-line by pushing the Online Button first.
Pressing the 

 button while holding down the 

 button starts head

cleaning.   If you see any problems on printouts,  clean the print head and try
again.

Release the two buttons immediately after pressing the 

 button and the

DATA LED will start to blink.  If it does not, the buttons were held down for too
long and you will need to start the test selection again.

✒ Note

 Do not open the top cover during the head cleaning operation.

 Press the buttons gently.  Do not press with too much force or hold the

buttons down for a long time. If you do the operation might now start.