Brother HL-655M User Manual
CHAPTER 6 TROUBLESHOOTING
6–1
CHAPTER 6
TROUBLESHOOTING
TROUBLESHOOTING
ALARM INDICATIONS AT A GLANCE
Operator Calls
If an error occurs, the printer indicates an ‘operator call’ by blinking the
ALARM lamp and any of the following lamps.
ALARM lamp and any of the following lamps.
Find the error and take the proper action to correct it. The printer
automatically recovers from most errors, but you may need to reset the
printer with the switches as described below.
automatically recovers from most errors, but you may need to reset the
printer with the switches as described below.
Blinking Lamp
Error
Action
PAPER ❍↔●
ALARM❍↔●
Paper jam
Paper empty
Mis Feed
Clear the paper jam referring
to the next section “PAPER
JAMS” and press the
FF/CONT switch if the printer
does not automatically resume
printing.
to the next section “PAPER
JAMS” and press the
FF/CONT switch if the printer
does not automatically resume
printing.
Load paper in the printer
referring to Chapter 2 and
press the FF/CONT switch.
referring to Chapter 2 and
press the FF/CONT switch.
Reinstall the paper and press
the FF/CONT switch.
the FF/CONT switch.
COVER ❍↔●
ALARM❍↔●
Cover open
Close the top cover of the
printer or install the multi-
purpose sheet feeder into the
printer firmly.
printer or install the multi-
purpose sheet feeder into the
printer firmly.
TONER ❍↔●
ALARM❍↔●
( every 5 seconds)
( every 5 seconds)
TONER ❍↔●
ALARM●↔●
ALARM●↔●
Toner low
Toner Empty
Indicates that the printer has
approximately 100 pages of
printing left before the toner
cartridge is empty.
approximately 100 pages of
printing left before the toner
cartridge is empty.
Replace the toner cartridge
with a new one.
with a new one.