Brother HL-650 Quick Setup Guide
2
Action 2: Install the Toner Cartridge / Drum Unit
1
Unpack the drum unit and gently rock it
from side to side five or six times.
from side to side five or six times.
2
Remove the protective parts, in order, as
shown in the illustration.
shown in the illustration.
NOTE
Do not expose the drum unit to light for
longer than a few minutes, as this will
damage the drum.
longer than a few minutes, as this will
damage the drum.
3
Open the top cover. Open the drum cover
by pushing the two blue tabs in toward the
center of the unit and lifting the cover
toward you.
by pushing the two blue tabs in toward the
center of the unit and lifting the cover
toward you.
4
Install the drum unit into the printer.
Make sure that you gasp the ▲ marks.