Brother E-100P Owner's Manual
6
1
Needle and presser foot
section
section
a Presser foot holder assembly
The presser foot is installed onto the presser foot holder
assembly.
assembly.
b Presser foot screw
Use the presser foot screw to hold the presser foot
holder assembly in place.
holder assembly in place.
c Presser foot (Zigzag)
The presser foot applies pressure consistently on the
fabric as the sewing takes place. Attach the appropriate
presser foot for the selected stitching.
fabric as the sewing takes place. Attach the appropriate
presser foot for the selected stitching.
d Feed dogs
The feed dogs feed the fabric in the sewing direction.
e Needle plate
The needle plate is marked with guides for sewing
straight seams.
straight seams.
f Shuttle hook
g Shuttle cover
g Shuttle cover
Open the shuttle cover to set the bobbin.
h Bobbin case
i Needle
j Needle bar thread guide
k Needle clamp screw
i Needle
j Needle bar thread guide
k Needle clamp screw
Use the needle clamp screw to hold the needle in place.
Flat bed attachment
The accessories are stored in a compartment inside
the flat bed attachment.
the flat bed attachment.
a
Lift the bottom of the flat bed attachment
toward you, and then pull the flat bed
attachment out to remove it.
toward you, and then pull the flat bed
attachment out to remove it.
a Flat bed attachment
b Storage compartment
b Storage compartment
Note
● Put the accessories in the bag, and then
store the bag inside the compartment. If the
accessories are not in a bag, they may fall
out, and be lost or damaged.
accessories are not in a bag, they may fall
out, and be lost or damaged.