Brocade Communications Systems Upgrade Pef IPMC5000PEF IPMC5000PEF User Manual

Output from the show ip pim all-vrf hw-resource command 

VRF

Name of the VRF.

Usage

Number of allocated SG entries in this VRF.

Fail

Number of failures while allocating SG entries in this VRF (due to the system-max
limit.

Total usage

Total number of SG entries in the system (all VRFs).

System-max limit for SG entries Configured system limit for pim-hw-mcache.

Displaying PIM Sparse configuration information and statistics

You can display the following PIM Sparse information:

•

Basic PIM Sparse configuration information

•

Group information

•

BSR information

•

Candidate RP information

•

RP-to-group mappings

•

RP information for a PIM Sparse group

•

RP set list

•

PIM neighbor information

•

The PIM flow cache

•

The PIM multicast cache

•

PIM traffic statistics

•

PIM counter statistics

Displaying basic PIM Sparse configuration information

To display PIM Sparse configuration information, enter the following command at any CLI level.

Device(config)# show ip pim sparse  

              

Global PIM Sparse Mode Settings

  Maximum Mcache         : 12992     Current Count              : 2

  Hello interval         : 30        Neighbor timeout           : 105

  Join/Prune interval    : 60        Inactivity interval        : 180

  Hardware Drop Enabled  : Yes       Prune Wait Interval        : 3

  Bootstrap Msg interval : 60        Candidate-RP Msg interval  : 60

  Register Suppress Time : 60        Register Probe Time        : 10

  Register Stop Delay    : 10        Register Suppress interval : 60

  SSM Enabled            : Yes       SPT Threshold              : 1         

 SSM Group Range        : 232.0.0.0/8  

 Route Precedence       : mc-non-default mc-default uc-non-default uc-default

 

Syntax: show ip pim [vrf vrf-name ] sparse

Displaying PIM Sparse configuration information and statistics