Brother PC-420 User Manual
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Upper Threading 31
Using thread that winds off
quickly
quickly
When using thread that winds off quickly, such as
transparent nylon thread or metallic thread, place the
enclosed spool net over the spool before placing the
spool of thread onto the spool pin.
If the spool net is too long, fold it to fit the size of the
spool.
transparent nylon thread or metallic thread, place the
enclosed spool net over the spool before placing the
spool of thread onto the spool pin.
If the spool net is too long, fold it to fit the size of the
spool.
1 Spool net
2 Spool
3 Spool cap
4 Spool pin
2 Spool
3 Spool cap
4 Spool pin
Pulling up the bobbin thread
When making gathers or before free-motion quilting,
first pull up the bobbin thread as described below.
first pull up the bobbin thread as described below.
1
Insert the bobbin into the shuttle.
• Refer to steps
• Refer to steps
1
through
5
of “Installing the
bobbin” (page 22).
2
Pass the bobbin thread through the slot.
Do not cut the thread with the cutter.
Do not cut the thread with the cutter.
3
While lightly holding the upper thread with
your left hand, press
your left hand, press
(needle position
button) twice to raise the needle.
1 Needle position button
X
The bobbin thread is looped around the
upper thread and can be pulled up.
upper thread and can be pulled up.
4
Carefully pull the upper thread upward to pull
out the end of the bobbin thread.
out the end of the bobbin thread.
2
1
3
4
1