Brother NV4750D User Manual
DESIGNING A STITCH
226
DESIGNING A STITCH
By using the MY CUSTOM STITCH
™
function, you
can register stitches you have created yourself.
You can also sew designs combining MY
CUSTOM STITCH
CUSTOM STITCH
™
creations with built-in
characters (see page 128).
a
Draw the stitch design on the grid sheet
(part code SA507, X81277-001).
(part code SA507, X81277-001).
b
Decide the spacing of the stitch.
*
By adjusting the spacing of a stitch, you can create
various patterns with one stitch.
various patterns with one stitch.
c
Place points where the pattern intersects
with the grid, and connect all the points
with a line.
with the grid, and connect all the points
with a line.
d
Determine the x and y coordinates of each
of the marked points.
of the marked points.
Memo
• Stitches that you create with MY CUSTOM
STITCH
™
can be a maximum of 7 mm
(approx. 9/32 inch) wide and 37 mm
(approx. 1-1/3 inches) long.
(approx. 1-1/3 inches) long.
• Stitches can be designed more easily with
MY CUSTOM STITCH
™
if you first draw the
stitch on the included grid sheet.
Memo
Simplify the design so that it can be sewn as a
continuous line. For a more attractive stitch,
close the design by intersecting lines.
continuous line. For a more attractive stitch,
close the design by intersecting lines.
If the design is to be repeated and linked, the
start point and end point of the design should
be at the same height.
start point and end point of the design should
be at the same height.
Memo
This will determine the stitch design that will
be sewn.
be sewn.