Bowflex TreadClimber TC1000 User Manual

Bowflex

TreadClimber

Owner’s Manual

Step 4: INSTALLING DRIVE BELT

Locate the following for this step:

PARTS:

• TreadClimber

Base & Treadle Assembly from

Step 3.

• One (1) Drive Belt

TOOLS:

• 3/16” Hex Key (included)

4-1 Place drive belt over roller pulley and motor

pulley (see Figure 4-1).

4-2 Make sure belt is seated into grooves and

installed exactly as shown (see Figure 4-2).

4-3 Using (1) 3/16" hex key completely remove

motor shipping bolt from motor pan (see Figure

4-3) and retain the bolt after removing.

NOTE: Removing shipping bolt will create

spring-loaded tension to drive belt

and make it tight.

4-4 Carefully lay unit back over to the upright

position.

Assembly Guide

Figure 4-3

Figure 4-2

Figure 4-1

Step 5: LOCkING THE TREADLES

Locate the following for this step:

PARTS:

• TreadClimber

Base & Treadle Assembly from

Step 4.

5-1 Line up the treadles until they are parallel with

each other.

5-2 Move the locking lever downward and to the left

and then upward into the ‘locked’ position with

your foot (see Figure 5-1). You may need to

gently rock the treadles up and down with your

hand until you hear a ‘click’ to lock the treadles.

NOTE: Locking lever must be all the way to

the top of the front plate. If not fully

engaged the treadles may unlock

during workout.

Figure 5-1

Lever in locked position