Boss Audio Systems GT-10B User Manual
104
Chapter 8 Parameters Guide
Type=SUPER FLAT, FLIP TOP, B MAN, CONCERT
810, BASS 360, T.E., SESSION, AC BASS
810, BASS 360, T.E., SESSION, AC BASS
Type=GTR Clean, GTR Crunch, GTR Drive,
GTR Metal
GTR Metal
Speaker Settings
Parameter/
Range
Range
Explanation
SP Type (Speaker Type)
Select the speaker type.
Off
This turns off the speaker simulator.
Original
This is the built-in speaker of the amp you selected
with PREAMP TYPE.
with PREAMP TYPE.
1x15”
This is a compact open-back speaker cabinet with
one 15-inch speaker.
one 15-inch speaker.
1x18”
This is a compact open-back speaker cabinet with
one 18-inch speaker.
one 18-inch speaker.
2x15”
This is a general open-back speaker cabinet with
two 15-inch speakers.
two 15-inch speakers.
4x10”
This is an optimal speaker cabinet for a large en-
closed amp with four 10-inch speakers.
closed amp with four 10-inch speakers.
8x10”
This is a double stack of two cabinets, each with
four 10-inch speakers.
four 10-inch speakers.
Mic Pos (Mic Position)
This simulates the mic position.
Center
Simulates the condition that the mic is set in the
middle of the speaker cone.
middle of the speaker cone.
1–10cm
Simulates the condition that the mic is moved away
from the center of the speaker cone.
from the center of the speaker cone.
Mic Level
0–100
Adjusts the volume of the mic.
BottomLev (Bottom Level)
0–100
Extracts the low-frequency components of the
sound input to this effect, and adjusts the amount
added to the effect sound.
sound input to this effect, and adjusts the amount
added to the effect sound.
DirectLev (Direct Level)
0–100
Adjusts the volume of the direct sound.
Parameter/
Range
Range
Explanation
GtrSPType (Guitar Speaker Type)
Select the speaker type.
Off
This turns off the speaker simulator.
Original
This is the built-in speaker of the amp you selected
with PREAMP TYPE.
with PREAMP TYPE.
1x8”
This is a compact open-back speaker cabinet with
one 8-inch speaker.
one 8-inch speaker.
1x10”
This is a compact open-back speaker cabinet with
one 10-inch speaker.
one 10-inch speaker.
1x12”
This is a compact open-back speaker cabinet with
one 12-inch speaker.
one 12-inch speaker.
2x12”
This is a general open-back speaker cabinet with
two 12-inch speakers.
two 12-inch speakers.
4x10”
This is an optimal speaker cabinet for a large en-
closed amp with four 10-inch speakers.
closed amp with four 10-inch speakers.
4x12”
This is an optimal speaker cabinet for a large en-
closed amp with four 12-inch speakers.
closed amp with four 12-inch speakers.
8x12”
This is a double stack of two cabinets, each with
four 12-inch speakers.
four 12-inch speakers.
Mic Type
This setting selects the simulated mic type.
DYN57
This is the sound of the SHURE SM-57.
General dynamic mic used for instruments and vo-
cals. Optimal for use in miking bass amps.
General dynamic mic used for instruments and vo-
cals. Optimal for use in miking bass amps.
DYN421
This is the sound of the SENNHEISER MD-421.
Dynamic mic with extended low end.
Dynamic mic with extended low end.
CND451
This is the sound of the AKG C451B.
Small condenser mic for use with instruments.
Small condenser mic for use with instruments.
CND87
This is the sound of the NEUMANN U87.
Condenser mic with flat response.
Condenser mic with flat response.
FLAT
Simulates a mic with perfectly flat response. Pro-
duces a sonic image close to that of listening to the
sound directly from the speakers (on site).
duces a sonic image close to that of listening to the
sound directly from the speakers (on site).
Mic Dis (Mic Distance)
Simulates the distance between the mic and speaker.
Off Mic
This setting points the mic away from the speaker.
On Mic
Provides conditions whereby the mic is directed
more towards the speaker.
more towards the speaker.
Mic Pos (Mic Position)
This simulates the mic position.
Center
Simulates the condition that the mic is set in the
middle of the speaker cone.
middle of the speaker cone.
1–10cm
Simulates the condition that the mic is moved away
from the center of the speaker cone.
from the center of the speaker cone.
Mic Level
0–100
Adjusts the volume of the mic.
BottomLev (Bottom Level)
0–100
Extracts the low-frequency components of the
sound input to this effect, and adjusts the amount
added to the effect sound.
sound input to this effect, and adjusts the amount
added to the effect sound.
DirectLev (Direct Level)
0–100
Adjusts the volume of the direct sound.
GT-10B_e.book 104 ページ ２００８年２月２６日 火曜日 午後３時３０分