Boss Audio Systems GT-10B User Manual
25
Chapter 1 Outputting Sounds
Chapter
1
The GT-10B has a variety of Play screen variations. You can switch the information shown in the Play screen by pressing
.
• You can use the PARAMETER knobs 1 through 4 to work with the values of the parameters displayed at the bottom of the Play screen. Also, for each parameter,
Switching the Play Screen
Screen 1
This displays the name of the patch and the
parameters you can work with using the
PARAMETER 1 through 4 controls.
parameters you can work with using the
PARAMETER 1 through 4 controls.
Screen 2
This screen displays the effect channel level
and the preamp that’s in use.
and the preamp that’s in use.
Screen 3
This screen displays the effect channel
mode and the effect channel level.
mode and the effect channel level.
Screen 4
This screen displays the functions assigned
to CTL 1 and 2, the EXP PEDAL SW, and the
EXP Pedal.
to CTL 1 and 2, the EXP PEDAL SW, and the
EXP Pedal.
Screen 5
This screen displays the functions assigned to
the Number Pedal Switch, CTL 3 and 4, the
external expression pedal (EXP PEDAL2).
the Number Pedal Switch, CTL 3 and 4, the
external expression pedal (EXP PEDAL2).
Screen 6
This is the screen shown when you’re in
Manual mode (p. 56). Manual mode is en-
abled only while this screen is displayed.
Pressing [CATEGORY/ENTER] in this
screen allows you to make settings for
MANUAL MODE SETTING.
Manual mode (p. 56). Manual mode is en-
abled only while this screen is displayed.
Pressing [CATEGORY/ENTER] in this
screen allows you to make settings for
MANUAL MODE SETTING.
Screen 7
The effects used, as well as their connection
sequence (CHAIN) in a channel is indicated.
sequence (CHAIN) in a channel is indicated.
Screen 8
The patch name and the output level meter
are displayed.
are displayed.
Adjusting the Output Level
1.
Adjust the GT-10B’s output level with the OUTPUT LEVEL knob.
*
About the S icon and A icon displayed at the Screen 4 and 5.
GT-10B_e.book 25 ページ 2008年2月26日 火曜日 午後3時30分