Corsair 4GB (2x2048MB), DDR2, NON-ECC, PC2-6400, 800MHz TW2X4G6400C4PRO Leaflet
Product codes
TW2X4G6400C4PRO
www.corsair.com
The TWIN2X4G6400C4PRO is a 4096 MByte matched pair of DDR2 SDRAM DIMMs. This part delivers outstand-
ing performance in the latest generation of DDR2-based motherboards. It has been tested extensively in multiple
DDR2 platforms to ensure compatibility and performance at its rated speed. This memory has been verified to
operate at 800MHz at the latencies of 4-4-4-12. The TWIN2X4G6400C4PRO comes with Enhanced Performance
Profiles (EPP), the open standard for performance module SPD’s jointly developed by Corsair and NVIDIA. EPP
SPD’s on Corsair modules allow users to automatically configure EPP enabled motherboards with aggressive
memory performance settings, for maximum memory and system performance. As part of Corsair's XMS Pro
Series, each module includes the high-efficiency aluminum XMS heatsink, and 24 activity LED's that show the
level of memory activity on each bank.
TW2X4G6400C4PRO
Every part is tested in Corsair's factory at 800MHz, but your actual results may vary depending on the overclocking margin of your CPU and motherboard. Newer motherboards may be
used for production test as they become available. Corsair may periodically update the part with newer RAM revisions of same or greater performance. RAM used on the module may
change without notice. © 2008 Corsair Memory, Inc.
used for production test as they become available. Corsair may periodically update the part with newer RAM revisions of same or greater performance. RAM used on the module may
change without notice. © 2008 Corsair Memory, Inc.
FEATURES
4096 Megabytes of DDR2 memory
Two matched 2GB modules
Enhanced Performance Profiles allow automatic
overclocking to aggressive performance settings
100% tested at 800MHz in high performance
DDR2 motherboards
Activity LED
Lifetime warranty
TEST SPECS
Each module pair is tested together at 800MHz
Tested and packaged in pairs
Packaged together immediately following
system test
Tested at 800MHz latency settings of 4-4-4-12
at 2.1V
SPD programmed at:
JEDEC standard 5-5-5-18 values at 800MHz
EPP standard 4-4-4-12 values at 800MHz, 2.1v